[ HLH-65W/f75/L280 ]
Change in focal length and concentrating width of the Halogen Line Heater HLH-65/f75
HLH-65W high performance line for heating air-cooled condensing at 75mm distance type Halogen Line Heater
It has excellent features halogen lamp heating,
Ultra-clean high-temperature heating
No heating medium
Fast start-up time, such as (1-2 seconds or so).
Made it difficult for water-cooled applications, 65 mm width mirror, are lines condensing type of 105mm height mirror.
<< Terminal box inside the high power lamp H18 specification >>
Halogen lamp is accurately positioned in the V-groove “Lamp Mount Plate”.
H10 specification for standard products, and then add the air nozzle seal portion of the lamp end cooling.
The air for cooling of 5-10 L/min is passed here.
Mirror maximum temperature when passing on one side channel of the cooling water 2.5L/min is about 150 ℃.
There are two series waterway, cooling efficiency is improved further be allowed to flow in parallel.
The lamp mount plate pushes the lamp against V -groove, and fixes it with a screw.
The high power lamp, the light that enters through the gap will heat the terminal box.
It reflects the light in the aluminum plate, and has prevented the entry of light by reducing as much as possible the gap.
Strongest power 5kw line heater was a combination of high- power lamp of 200v-5kw enable mirror length 280mm.
If the overwhelming power of this heater is used, in the former, various kinds of impossible heating work can be performed easily.
It is set to (color temperature 2950K) 2000 hours the lamp life, but can be set to any life time.
However condensing wide spread as long life setting, maximum heating temperature also decreases.