Easily heating high temperatures!
◆ Feature ◆
- Easily heating high temperatures by the kit !
- Easily heating high temperatures at focal size Φ6 !
- Easily adjusting the radiation diameter (focal size) by manual lift!
- Easily changing the heat power (wattage) by slide transformer!
- Easily cooling by compressed air!
The output was adjusted to 5v by the slide transformer.
It can visually check the rated point in diameter Φ6 of 25w.
It shine so very bright emission of heat generation 110W maximum output.
The diameter of a rated point cannot be visually checked.
Then attached protective glasses are used,
positioning of an irradiation point can be performed easily visually.
Focal length and focus diameter of the Halogen Pont Heater HPH-35
【Lab kit packing product】
- Air cool type small Halogen Point Heater HPH-35CA/f15/12v-110w/GW
Heating the subject with 110w.
- Manual lift.
Up and down 80 mm by 16 rotating knobs, the accuracy is 0.5 mm.
Manual lift. Platform surface is 100mm x 100mm,
- Square Australia Brick.It is useful when place the test piece.
- Heater mounting bracket
- Test stand
- Power cable for heater controller
- Manual variable power supply HCV-AC100-240V/DC12V-300W
Input voltage in the range of AC100V-AC240V.
The output adjustable range DC0v ～ 12v.
Easily changing the heat power (wattage) by slide transformer.
- Safety glasses against high intensity light
It can visually check the high-intensity irradiation point at maximum output.
*In addition to the above, compressed air for cooling is required for use.