INDEX
Relay Output and Detect Oil Film on the Water.
- Stable and can be detected in liquid shake.
- The power supply, DC24V, AC110/220V, AC120/240V can also be produced.
- Changes in the capacitance detection electrode, and water to determine the oil film.
- Water level fluctuations, follows the detector was attached to the floater up and down.
【Applications 1】Drainage Pit
Pitt and rainwater drainage, and to detect oil slick pit of industrial wastewater can be avoided in advance pollution control violations.
【Applications 2】Tank Yard
The tank to detect the oil film, Can avoid violations of pollution regulations in advance. In addition, the fire prevention as well.
【Applications 3】Underground Tank
The tank to detect the oil film, Can avoid violations of pollution regulations in advance.
In addition, the fire prevention as well.
【Applications 4】Boiler Drain Tank
The oil to prevent any contamination of water supplied to boilers.
【Amplifier Specification】
| Type | C-200 |
|---|---|
| Supply voltage | AC100/200V±10% 50/60Hz |
| Power consumption | 2W |
| Ambient temperature | -10℃～55℃ |
| Relay contact capacity | AC110 1A / 220V 0.5A |
| External dimensions | W144 X H220 X D100 |
| Material | Aluminum |
| Mass | 2kg |
【Detector Specification】
| Ambient temperature | -10℃～55℃ |
|---|---|
| Detection stroke | 340mm |
| Mounting Flange | JIS10K-150AFF |
| Cable length | 5m |
| External dimensions | Φ280 X L713 |
| Material | SUS304 |
| Mass | 12kg |
* For liquids other than water, please contact us.
Related page:
Dram can Level Sensor & Water surface oil film detector price list 
No.2 End surface of the film take-up fixed 
3-7.Three types of drying 2.Drying of the surface attached water 
No.102 Drying after the leak test using a water tank 
No.2 Heat source for the inspection of the fire detector 
3-2.Evaporation of water 
No.4 Film shrink 
No.53 Bonding of the film and paper