●Feature of the DC power Air Blow Heater
- We were callange the limit of the Air Blow heater. Did not exist until now, We manufacture the DC power Air heater.
- Accurate temperature control can be performed using the thermocouple of the output port.
- Since the internal thread is cut at the tip, various metal fittings can be attached.
- The ABH-13AM series has a metal pipe case of various length.
- The ABH-13AM series has a ceramics paper protection pipe for incident accident countermeasures
- The ABH-13AM series can watch heating element temperature by safe measures for prevent overheat.
- For the aging inspection of electronic components
- For the soldering of electronic components
- For the pinpoint heating of resin
- For the gas heating of medical equipment
◆The ABH-13AM has screw thread to the output mouth. It can install many accessories.
◆The ABH-13AM series has a metal pipe case of various length.
◆The ABH-13AM series has a ceramics paper protection pipe for incident accident countermeasures
*1 Heating wires are used in Air Blow Heater has the most durable in the oxidizing atmosphere.
ABH types are in direct contact with the gas so that the heating wire, high heat transfer efficiency,
high temperature (800 ℃ approximately) can be obtained.
*2 ABH type is used for argon and nitrogen, compared to the air life tend to be shorter.
- Hot air blow output
- Screw for attachment
- Thermocouple for output air temperature
- Metal case stainless SUS304
- Heat tube Quartz glass
- Heat element Fe-Cr-Al alloy
- Thermocouple for heat element
- Insulation Alumina ceramics
- Mount base Steatite
- Insulating silicon rubber
- Power wire Glass cloth or Silicon rubber
- Thermocouple for output air Glass cloth or Silicon rubber
- Thermocouple for heat element Glass cloth or Silicon rubber
- Air input connector Nickel plated Brass