For Clean-room , Chemical gas

Feature

◎  This heater eliminated output of contamination to the limit.
◎  Because the heating element and the sensor do not touch gas, it is applicable also to heating of vapor or low-concentration corrosive gas.
○  The gas flow is heated indirectly in the gap of the outer glass tube and the inner glass tube.
△ The limit of this heater is an operating condition of heat-resisting rubber (Viton, Silicon).
X  We are not recommend for heating of fluids containing residual material within the heater.

◆ Output in a short time 500℃ hot air.
◆ Builtin a thermocouple in a hot-air output unit, can easily control temperature.
◆ Directly heated nitrogen can be used in the experiment of anaerobic microorganisms.
◆ Safe, Clean and just blow with electric heating and gas supply, fire flame will not come out.
◆ The DGH can be manufactured in a range of 100W – 12kW.
◆ Outside diameter 13-140mm, DGH is compact.

Types of available gases

Configuration example

Basic structure of DGH

1. Hot air blow output
2. Screw for attachment
3. Thermocouple for output air temperature
4. HEX Nickel plated Brass
5. Outer heat tube Quartz glass
6. Inner heat tube Quartz glass
7. Metal case stainless SUS304
8. Heat element Fe-Cr-Al alloy
9. Insulation Alumina ceramics
10. Heat element tube base Steatite
11. Heat resistance silicon rubber
12. Sealing silicon rubber
13. Power wire Glass cloth or Silicon rubber
14. Thermocouple for output air Glass cloth or Silicon rubber
15. Thermocouple for heat element Glass cloth or Silicon rubber
16. HEX Nickel plated Brass
17. Air input connector Nickel plated Brass
18. Air input

Catalog

PDF Catalog Download