1-5.The Air Blow Heater Model Name Notation Method

EXAMPLE	ABH-100ｖ-350ｗ/10ＰＳ/L94/+Ｓ

 

Type	ABH	Indicate the Air Blow Heater type ABH
Voltage and power	100v-350w	Rated voltage and wattage (power)
Tube diameter	10	Indicate the 10 series. Glass heating tube outer diameter is φ10.
Output shape	P	The shape of the heating air output.
Basic structure	S	Indicate the S series.
Pipe length	L	Indicate the heat pipe length.L94 is 94 mm.
Option	+S	Indicate built-in K-type thermocouple

 

Type classification	ABH	For standard type the Air Blow Heater
	ABH+HR	a
	VAH	a
	DGH	For clean room type the Air Blow Heater
	PTH	For more higher temperature using platinum heating element

Rated voltage and wattage (power)

Quartz glass pipe size	Indicate at the integer part with the outside diameter size of the conformity quartz tube.
	18×6 (Φ18 tubes x 6) indicate bundled 6-tube structures inside large heaters.
	Double glazing structure like DGH is the outside glass tube outside diameter.

 

Output shape	A	Straight
	B	Tapered shape made by glass
	C	Slit made by glass
	P	Screw
	T	Slit made by SUS
	X	Special order other than the above.

 

Basic structure	S	Screw joint, heating element and metal casing can separate .
	H	Screw joint, metal casing can not separate.
	F	One-touch joint, metal casing can not separate.
	M	Hose nipple joint, metal casing can not separate.
	Mp	Screw joint, metal base tube only, no metal casing.
	G	Hose nipple joint, ceramic base, no metal casing.
	X	Special order other than the above.

 

Option(Additional)	/+S	Built-in hot air temperature sensor (thermocouple K-type)
	/+2S	Built-in hot air and heating element temperature sensor
		(thermocouple K-type)
	/+S(d)	Specified dimensions thermocouple wire diameter d
	/+S(R)	Thermocouple R-type
	/+S(L)	Sensor position specified (L) dimensions
	/+2S(L1/L2)	Sensor position specified (L1/L2) dimensions
	/SL	Sensor lead wire specified dimensions
	/PL	Power lead wire specified dimensions
	/SL1,PL2	Sensor lead wires L1, power lead wire L2 specified dimension
	/S,PL	Sensor lead wire, power leads specified dimension of the same length
	/+MT	Add metal casing
	/（TF）	Change into Teflon lead wire
	/+CP	Change into ceramic tube from quartz tube

* The standard making unit, mm. Unit notation “mm” is omitted. Otherwise, the unit noted.