INDEX
Test Labolatory KOBE
International Medical Device Alliance
Capable of actual test “Test Lab Kobe”, it is located in the International Medical Development Center (IMDA) 4F.
[ Actual test compatible models ]
- Air Blow Heater
- Halogen Point Heater
- Halogen Line Heater
- Halogen Ring Heater
- Far-infrared Point Heater
- Far-infrared Line Heater
- Far-infrared Panel Heater
- Ultraviolet Application Equipment
[ Actual test Guidelines ]
- The heating test using standard models.
- In order to observe the customer’s company secret, it is a complete reservation system.
- Requires prior confirmation of the actual test content. There are also things that can not be heated by the object.
- Client can use a simple moving device.
If Client wish to have advanced moving heating test, please bring a moving device. - Heating test such as flammable, radioactive materials, poisonous and unapproved microorganisms can not be on security.
- For safety, presence of our staff is required.
[ Actual test data management ]
We are able to temperature measured by thermocouple and the radiation thermometer.
If customer want a confidential, please bring a customer’s data logger.
[ Application method ]
Please send the person who will hope for specification confirmation before purchase by a production by following mail.
We will contact you from the person in charge.
[ Attention ]
(1) Customer’s secret is maintained and it’s a perfect reservation system to avoid an overlap between the customers.
(2) There are no show room functions. Please check the outline of a product by our site.
[ Access ]
●Access from Kansai International Airport(KIX)
Take a shuttle bus to Kobe sannomiya.
From the No. 12 bus stop outside the passenger terminal building on the ground floor.
Kansai Airport — Sannomiya : About 70 min.
Access from Sannomiya to Heat-tech Test Lab. Kobe
Sannomiya Station — Iryo Center Station (Port-liner) : 12 min.
(Take trains bound for Kobe Airport)
Exit the station on the right after passing the ticket gate.
Turn right at the bottom of the stairs and continue for approximately 3 minutes.
IMDA Building the right-hand side.
Take the High-Speed ferry to Kobe Airport .
The ride on the shuttle bus takes six to eight minutes and is free. The ride on the ferry takes about 30 minutes.
From Kobe Airport , take the Port Liner and get off at the Iryou Center Station. The trip takes six minutes.
●Access from Kobe Airport(UKB)
Access from Kobe Airport to Heat-tech Test Lab. Kobe
Kobe Airport Station — Iryo Center Station (Port-liner) : 6 min.
(Take trains bound for Sannomiya)
Exit the station on the right after passing the ticket gate.
Turn right at the bottom of the stairs and continue for approximately 3 minutes.
IMDA Building the right-hand side.
●Access from Tokyo or Shinagawa Station to Shin Kobe Station.
Take the Shinkansen from Tokyo or Shinagawa station to Shin Kobe Station.
The trip takes a little less than three hours.
From Shin Kobe Station take the Yamate subway line to Sannomiya Station :5minutes.
Change there to the Port Liner and get off at the Iryou Center Station (12-minute ride)
[Guidance of the hotels]
●The closest hotel
●The hotels close to the second
[ Surrounding facilities]
●The supercomputer ” Fugaku “
●The world’s largest third-generation synchroton radiation facility Spring-8
