■Model selection and so on

Q:How can I determine the type of Air Blow Heater?
A:Please check with the Air Blow Heater model selection site.

Q:Is there A:Air Blow Heater that can use A:DC power supply?
A:Yes available. Please check with Ultra-compact DC power Air Blow Heater site.

Q:Is there A:Air Blow Heater that can heat the breeze?
A:Yes available. Please check with “Air Blow Heater for Super breeze” site.

Q:Is there A:Air Blow Heater that can be inserted into A:vacuum container?
A:Yes available. Please check with Vacuuming correspondence Air Blow Heater site.

Q:Is there A:Air Blow Heater that can be used in A:clean room?
A:Yes available. Please check with the Overview of standard Double Glass tube Air Blow Heater DGH Series site.

Q:Is there A:Air Blow Heater that can heat the corrosive gas?
A:Yes available. Please check with the Overview of standard Double Glass tube Air Blow Heater DGH Series site.

Q:Is there A:Air Blow Heater that can heat water vapour?
A:Yes available. Please check with the Overview of standard Double Glass tube Air Blow Heater DGH Series site.

Q:Is there A:Air Blow Heater that can heat the air to 1000 ℃?
A:Yes available. ABH 100v-350w/10PS/L103/+S can be heated with durability of about 1 hour. Please check with the video below.
Heating to 1000 ℃ the air by the Air Blow Heater

Q:Is it possible A:Air Blow Heater to further heat the high temperature gas?
A:It is possible to manufactured as A:special order item.

Q:Is it possible to confirm the heating performance at Heat-Tech Co,Ltd. inside of the company?
A: It is possible. A:test laboratory can be used, so please apply from A:request site.

Q:Is it possible to confirm the heating performance before purchase by A:test fragment?
A: It is possible. Since A:test piece heating test system can be used, so please apply from A:request site.

■Ordering and so on

Q:How long is the delivery time of A:Air Blow Heater?
A:It is about A:month since all items are made to order.

Q:Is it possible to extend the power supply line of the heater?
A: It is possible with additional fee. When ordering, please specify the length of the wire in□ with /P□ m.

Q:Is it possible to extend the heating pipe of the Air Blow Heater?
A: It is possible with additional fee. Please specify when ordering.

Q:Is it possible to send it directly to A:foreign country?
A: It is possible with additional fee. Please specify when ordering.

Q:Is it possible to issue A:Inspection Sheet ?
A: It is possible with additional fee. Please specify when ordering.

Q:Is it possible to issue A:English Users Manual ?
A: It is possible. Please specify when ordering.

Q:What number is the HS code?
A:Please confirm with the HS code site.

Q:Is it possible to issue A:Certificate of non-applicability by Japanese government Export Trade Control Order?
A: It is possible. Please specify when ordering.

Q:Is it possible to issue A:RoHS Directive 6 Substances Non-Usage Certification ?
A: It is possible. Please apply from A:request site.

■Control and so on

Q:How should temperature control of A:Air Blow Heater be done?
A: Please use heater controller HCA:series mounted with A:thermo controller.

Q:How should it be done to use A:Air Blow Heater as A:Heat-Gun?
A:Please use A:Heater Controller HCAFM series.

Q:How should flow rate control of A:Air Blow Heater be done?
A:Please use A:high-performance Air blow Heater Controller AHC3 series.

Q:How should multi step set control of A:Air Blow Heater be done?
A:Please use A:Stepset Controller Profile-maker SSC series.

Q:How should overheating supervision of A:Air Blow Heater do?
A:Please use the supervisor function of HCA, AHC3 and SSC.

Q:How should it be done to make it IOT correspondence by A:Air Blow Heater Controller?
A:Please use RS485 function of A:HCA, AHC3 and SSC.

Q:How should it be done to prevent windless heating by A:Air Blow Heater?
A:Please interlock with A:pressure gauge or A:flowmeter.

■Remodeling and so on

Q:Can in-house remodeling the tip of the Air Blow Heater ?
A:NM / AM type is to turn off the internal thread to tip. Adapter manufactured by the customer is possible.

Q:Is it possible to attached A:flange to the tip of A:Air Blow Heater?
A:It is possible to combine A:coupler and install A:screw flange. So A:tip of A:NM / AM types has inner screw.

Q:Is it possible to welding A:flange to the tip of A:Air Blow Heater?
A:It is possible to manufactured as A:special order item.

Q:Is it possible to to install A:terminal box at the base of A:Air Blow Heater?
A:It is possible to manufactured as A:special order item.

■Performance and so on

Q:What is the principle of Air Blow Heater?
A: The Air Blow Heater is A:heating device, which supplies the gas of normal temperature to A:heating tube, make hot air blow.

Q:How long is the lifetime of A:Air Blow Heater?
A:Please check with the Air Blow Heater lifetime site.

Q:Is it possible to heat any kind of gases?
A:Please check with Overview of standard Air Blow Heater ABH Series site.

Q:What is the voltage of the Air Blow Heater.
A:There are DC12V・24V　AC100V · 110V · 120V · 200V · 220V · 230V · 240V types of heaters.
Please specify the voltage at the time of order.

Q:How do I Installation of the Air Blow Heater ?
A　We have prepared the heater bracket. Please check the following site.
H-type stand for medium and large heater

T-type stand for small Air Blow Heater

Q:Can the monitor of the temperature of the Air Blow Heater ?
A:It can easily! If you use the built-in thermocouple additional order.
The temperature controller SDC15 of our sale, you can use the monitor software SLP-C35J50 (sold separately), you can save the record and monitor the trend graph.

Q:What is the cause of failure of the Air Blow Heater.

A:The most common cause is the heating of no air flow.
The heating element is burn out and disconnected.
Turns on electricity without opening the valve of the air supply line, or the hose separates from during work, is the cause.
It is safe if A:small pressure sensor is installed on A:monitor. (　Sold in our company　)

The 2nd most is overheat.
When used in the just rating, by overshooting of the thermo controller, it becomes burn out.
In this case, please use the Azbil SDC series which can perform A:setup of overshooting zero. (　Sold in our company　)

The 3rd most is the oil mist in heating gas.
Oil mist burns, it damages the heater.
It is safe if A:oil filter is installed in the middle of piping.

The 4th is over air pressure.
Be careful of the water hammer phenomenon at valve opening.
It is safe if A:regulator is installed in the middle of piping.