Air Blow Heater

4-3-1.Features of the hot wind heat source Dryness with constant temperature and humidity of a hot wind is called the constant drying condition. If the temperature of a hot air is changed, the relative humidity and specific heat, density, viscosity, ...

[ Problem Point ] The advanced battery with environment resistance is required for. [ ⇒Kaizen Point ] The temperature test was done using the Air Blow Heater. The rapid temperature change which was impossible until now has been reproduced. The ...

Temperature and Humidity of the hot air is called the steady-state drying conditions drying constant. 4-2-1.If wind velocity of a hot wind is enlarged, a coefficient of heat transfer will also become large. Heat transfer coefficient of the dry conditions ...

 *Check Video is here This video is a demonstration in the air of 400 ℃ Heat shrink film of battery by the Air Blow Heater.

*Check Video is here This video is a demonstration which evaporates 6.5 cc of tap water with 500℃ air by the Air Blow Heater.

Check the performance of the air and nitrogen as the medium to be used in the hot-air drying. 4-1-1.The role of air Air at room temperature, the atmospheric pressure will behave as a nearly ideal gas. Density of air ρ ...

*Check Video is here This video is a demonstration drill holes in the air of 400 ℃ in Polyolefin heat-resistant five-layer film in the Air Blow Heater.

*Check Video is here This video is a demonstration drill holes in the air of 400 ℃ in polystyrene PS pack in the Air Blow Heater.

The 0th law of thermodynamics—Law of heat balances James Clerk Maxwell FRS FRSE (13 June 1831 – 5 November 1879) Scottish mathematical physicist. If the objects A and B, B and C are thermal balances, A and C are also ...

[ Problem Point ] Oxide film on the weld surface is worried about. [ ⇒Kaizen Point ] High temperature heating of the shielding gas was carried out using the hot wind heater. Even if it thickened metal, welding said well.

[ Problem Point ] In order to thicken a metallic thin film, the high temperature hot wind was required. [ ⇒Kaizen Point ] The shot-peened under high temperature conditions using the Air Blow Heater. Junction went well even if thickening ...

*Check Video is here This video is a demonstration drill holes in the air of 400 ℃ in polypropylene PP tray in the Air Blow Heater.

[ Problem Point ] Requires secure chemical-free pest control that do not use chemical fumigation. [ ⇒Kaizen Point ] Hot air is anthelmintic, in a way that does not use chemicals, to disinfect from egg to adult in a hot-air, ...

To say that “drying”, there is a dry work of three types. They are dryness of surface water of adhesion, dryness of a coat, and internal dryness of material. Since internal dryness has been explained until now, describes the drying ...

[ Problem Point ] It did not shrink processed while temperature control. [ ⇒Kaizen Point ] The precise temperature control in the Air Blow heater, it was appropriate temperature heating. Thermal destruction is eliminated, defect rate was reduced.

[ Problem Point ] There was no evaluate the performance while changing the temperature of the coil springs. [ ⇒Kaizen Point ] It heated from room temperature to 850℃ with the Air blow heater. The quality assessment in the arbitrary ...

[ Problem Point ] There was no evaluate the performance while changing the temperature of the test piece. [ ⇒Kaizen Point ] It heated from room temperature to 850℃ with the Air blow heater. The quality assessment in the arbitrary ...

Even if it tells “dryness” to a mouthful, there are three kinds of dry work. They are dryness of surface water of adhesion, dryness of the coating film, and internal dryness of material. Since the preceding sections has explained the ...

[ Problem Point ] Managing the heat-resistant temperature of grease, it came to carry out a quality assessment and there was nothing. [ ⇒Kaizen Point ] It heated from room temperature to 550℃ with the Air blow heater. The quality ...

Energy for evaporating the water 1kg of 20 ℃ is 2454kJ. 1kW/h is 3600kJ so…. 2454kJ is the working time and energy consumption of the same amount running 40 minutes of 1kW motor. Or, the halogen heater 5kw 85% efficiency ...

When dry quickly at high speed wet material, deviation of the moisture content and temperature of the material inside will increase. As a result, the critical moisture content is increased, it may cause cracks. When it comes to the state ...

As for the Drying characteristic curve of the Decreasing drying rate period, five patterns appear with the characteristic of material. The type of material The composition of material The shape of material The possession state of water A-Type A-type is ...

The heat balance is the sum of 4 types heat、which is entering heat, exiting heat, generation of heat, and endothermic. By the law of conservation of energy, the quantity of these (Quantity of heat change of the system) = (Quantity ...

In order to move water vapor becomes water evaporates, the water vapor pressure difference is required between the air and the convection layer and the surface of the material. Water vapor of the material surface so that the saturated pressure ...

In the classification of thermodynamics, a dry process is a “The open system.” Dryness is “evaporating and separating a liquid from a solid.” Heat and pressure are operated, water is evaporated and it moves. The height of heat is the ...