[ Problem Point ] We have no way to small length=2.5m quickly high temperature heater. [ ⇒Kaizen Point ] Heated by the Halogen Line Heater reversible cloth. It is attached to the narrow place, and got cold so quickly, safety ...

[ Problem Point ] The sample was too big,and it couldn’t be stored in the thermostat tank,and we were in trouble. [ ⇒Kaizen Point ] The test point was heated by the Air Blow Heater. Heat cycle testing could be ...

[ Problem Point ] Rising of the heater is slow,it couldn’t balance with coating of shrink-proofed resin. [ ⇒Kaizen Point ] Dried by the Halogen Line Heater after coating fabric. Since the maximum temperature heated up in 5sec, immediately after ...

[ Problem Point ] When it was worked in the calendaring roll which got cold,horizontal stripes occurred. [ ⇒Kaizen Point ] Calendaring roll was preheated by the Air Blow Heater. Horizontal-striped occurrence was prevented.

[ Problem Point ] Rising of the heater is slow,therefor it can’t correspond to work of the special express job. [ ⇒Kaizen Point ] Dried by the Halogen Line Heater after soaping the dyed fabric. Since the maximum temperature heated ...

[ Problem Point ] Gluing of lead free solder would be a problem badly. [ ⇒Kaizen Point ] The small spot was preheated by the Air Blow Heater. After preheating, gluing of solder became good. Moreover it was also heat ...

[ Problem Point ] Glass plate couldn’t interfere and heat the inner resin in suitable temperature. [ ⇒Kaizen Point ] Passes through the glass , it was heated by the Halogen Line Heater. The product fineness has improved because the ...

[ Problem Point ] We have no idea about good annealing of the glass. [ ⇒Kaizen Point ] Warming by the Ir Panel Heater. Glass is able to be warmed on the broad wavelength.

[ Problem Point ] When resin board was processed while getting cold,breakage entered. [ ⇒Kaizen Point ] Resin board was preheated by the Air Blow Heater. The flexibility was recovered and breakage was prevented.

[ Problem Point ] We have no way to put in the electric furnace to high temperatures. [ ⇒Kaizen Point ] Baked by the cave heating method with the Halogen Line Heater. Obtained unprecedented color.

[ Problem Point ] Since going up of the temperature of the storage warehouse is slow,foods get cold. [ ⇒Kaizen Point ] Warming by the Ir Panel Heater. Keeping warm storage does temperature up by a short time,so the foods ...

[ Problem Point ] It wasn’t possible to make hot nitrogen gas while keeping the purity. [ ⇒Kaizen Point ] Nitrogen was heated by the Air Blow Heater. Air didn’t get mixed and it was possible to make high temperature ...

[ Problem Point ] We have no way to Small Strong infrared heater. [ ⇒Kaizen Point ] Dryness by the Halogen Line Heater in right and left. Since the maximum temperature heated up in 5sec, immediately after the start of ...

[ Problem Point ] We have no idea  about rapid heating of the entrance hall. [ ⇒Kaizen Point ] Heating by the Ir Panel Heater. Since rapid heat up on the entrance hall,Sudden visitors could be glad.

[ Problem Point ] Wrinkles of shrink films of DVD packing were left,and we were in trouble. [ ⇒Kaizen Point ] It was heated by a slight fever by the Air Blow Heater and wrinkles were flatted. The quality of ...

[ Problem Point ] We have no idea about no uneven illumination strong long heater. [ ⇒Kaizen Point ] Dryness by the Halogen Line Heater Length=2.5m. The product fineness has improved because the temperature is changed by the leather quality.And ...

[ Problem Point ] We have no idea  about heating unit for drying booth. [ ⇒Kaizen Point ] Drying by the Ir Panel Heater. Since rapid heat up on drying booth,increased uptime. Now able to respond flexibly to unexpected interrupt ...

[ Problem Point ] We suffered from coming loose after cutoff. [ ⇒Kaizen Point ] The spot was heated and cut according to the temperature of the chemical fiber by the Air Blow Heater. End face processing became unnecessary.

[ Problem Point ] We have no idea about small and strong quickly heater. [ ⇒Kaizen Point ] Preheated by the Halogen Line Heater in front and back. The quality has improved because a temperature steady by the voltage regulation ...

[ Problem Point ] We have no idea  about curing of the epoxy resin. [ ⇒Kaizen Point ] Curing by the Ir Panel Heater. Since rapid curing, increased uptime. Now able to respond flexibly to unexpected interrupt work.

[ Problem Point ] When the baking color was put,the smell of the gas shifted,so we were in trouble about gas. [ ⇒Kaizen Point ] A spot was heated by the Air Blow Heater. and the baking color was put. ...

[ Problem Point ] Installation space is narrow,we have no idea about long length small and strong heater. [ ⇒Kaizen Point ] Preheated by the Halogen Line Heater in front and back. The product fineness has improved because the temperature ...

[ Problem Point ] We have no idea  about cost cut of electric. [ ⇒Kaizen Point ] Grown-up ray was illuminated by the Ir Panel Heater. The far-infrared radiation was illuminated at the moment, so power time was finished by ...

[ Problem Point ] We were in trouble because there were no small ignition sources. [ ⇒Kaizen Point ] The Air Blow Heater ignited heated to high temperature.

[ Problem Point ] Installation space is narrow,we have no idea about long length small and strong heater. [ ⇒Kaizen Point ] Preheated by the Halogen Line Heater. The product fineness has improved because the temperature is changed by the ...