Best Applications List

[ Problem Point ] Laboratory has been electrified,the gas was not able to be used and I was in trouble. [ ⇒Kaizen Point ] It was heated by the Air Blow Heater. It was very useful for high temperature heating ...

[ Problem Point ] We have no way to heated uniformly long area. [ ⇒Kaizen Point ] Heated by the Halogen Line Heater. Since the maximum temperature heated up in 5sec,immediately after the start of operation could work. Non-contact heating ...

[ Problem Point ] It was dry by steam. When winter came,we were in trouble because it condensed into dew. [ ⇒Kaizen Point ] Heated and dried in the Air Blow Heater. The dewfall disappeared because it used dry air.

[ Problem Point ] We have no idea about high temperature heater on short time. [ ⇒Kaizen Point ] Heated by the Halogen Line Heater. Since the maximum temperature heated up in 5sec, immediately after the start of operation could ...

[ Problem Point ] The control of the surface tension of a metallic film was difficult when drying with the high temperature gas. [ ⇒Kaizen Point ] It dried using a wide nozzle by the Air Blow Heater. The surface ...

[ Problem Point ] We have no idea how to heat semiconductor wafer in the vacuum chamber. [ ⇒Kaizen Point ] Heated by the Halogen Line Heater. Since the maximum temperature heated up in 5sec, immediately after the start of ...

[ Problem Point ] It’ll be done only to heat a culture medium from the surface. It couldn’t be heated uniformly and in trouble. [ ⇒Kaizen Point ] The heating air was made with the Air Blow Heater. The accuracy ...

[ Problem Point ] We have no idea how to deposition of aluminum in the vacuum chamber. [ ⇒Kaizen Point ] Heated by the Halogen Line Heater. Since the maximum temperature heated up in 5sec, immediately after the start of ...

[ Problem Point ] It was troubled to be contaminated with airborne bacteria breeding in the liquid directly in the aeration air. [ ⇒Kaizen Point ] The aeration was done after heating was sterilized by the Air Blow Heater. Airborne ...

[ Problem Point ] We have no way to the drawing press wrinkle. [ ⇒Kaizen Point ] Preheated metal material by the Halogen Line Heater. Since the maximum temperature heated up in 5sec, immediately after the start of operation could ...

[ Problem Point ] The conventional method was in trouble because it contains metal ions in dry air. [ ⇒Kaizen Point ] Heated and dried in the Air Blow Heater designed for clean room. Since heating the coated glass,and metal ...

[ Problem Point ] We have trouble to the die temperature drift for changes in precision finishing. [ ⇒Kaizen Point ] Preheated die by the Halogen Line Heater. Since the maximum temperature heated up in 5sec, immediately after the start ...

[ Problem Point ] We used the industry dryer. Unable to fine temperature control was a problem. [ ⇒Kaizen Point ] Heated and dried in large type the Air Blow Heater. Dehumidification and sufficient quality of injection molded raised in ...

[ Problem Point ] It is very difficult to annealing temperature control. [ ⇒Kaizen Point ] Heated by the Halogen Line Heater casting surface. Since the maximum temperature heated up in 5sec, immediately after the start of operation could work.The ...

[ Problem Point ] We used the industry dryer. Unable to fine temperature control was a problem. [ ⇒Kaizen Point ] Heated only the surface by the small calorie by the Air Blow Heater and made them shrink. Does not ...

[ Problem Point ] We have no idea about how to heat in the vacuum chamber. [ ⇒Kaizen Point ] Heated by the Halogen Line Heater. Since the maximum temperature heated up in 5sec, immediately after the start of operation ...

[ Problem Point ] Had trouble peeling off the seal is broken at the end. [ ⇒Kaizen Point ] A spot was heated by the Air Blow Heater and the glue was made soft. The productivity came off well,and improved.

[ Problem Point ] Rising of the heater is slow, the heat activity is bad. [ ⇒Kaizen Point ] Heated by the Halogen Line Heater. Since the maximum temperature heated up in 5sec, immediately after the start of operation could ...

[ Problem Point ] The ammonia gas was dangerous,so it couldn’t be heated safely and I was in trouble. [ ⇒Kaizen Point ] It was heated airtightly by a DGH series of the Air Blow Heater. An experiment heated it ...

[ Problem Point ] Rising of the heater is slow, the productivity is bad. [ ⇒Kaizen Point ] Heated by the Halogen Line Heater. Since the maximum temperature heated up in 5sec, immediately after the start of operation could work.The ...

[ Problem Point ] There was no suitable one to check the thermal distortion of liquid crystal. [ ⇒Kaizen Point ] It was necessary to do 100% inspection and an image processing machine was adopted, so the central part was ...

[ Problem Point ] Glass plate couldn’t interfere and heat the inner resin in a suitable temperature. [ ⇒Kaizen Point ] Passes through the glass , it was heated by the Halogen Line Heater. The product fineness has improved because ...

[ Problem Point ] Until now had been roasted in the flames of gas pipe where the gas had no trouble using the impossible. [ ⇒Kaizen Point ] The Air Blow Heater to heat sterilization at high temperatures. If it ...

[ Problem Point ] Glass plate couldn’t interfere and heat the inner resin in a suitable temperature. [ ⇒Kaizen Point ] Passes through the glass,it was heated by the Halogen Line Heater. The product fineness has improved because the temperature ...

[ Problem Point ] Until now we had a filter on the decontamination of heavy equipment. [ ⇒Kaizen Point ] The Air Blow Heater to heat sterilization. So small,now can be used anywhere in the air sterilization.