Focal sizeΦ6
Easily heating high temperatures!
◆ Feature ◆
- Easily heating high temperatures by the kit !
- Easily heating high temperatures at focal size Φ6 !
- Easily adjusting the radiation diameter (focal size) by manual lift!
- Easily changing the heat power (wattage) by slide transformer!
- Easily cooling by compressed air!
[ Power:5V/about25W ]
The output was adjusted to 5V by the slide transformer.
It can visually check the rated point in diameter Φ6 of 25W.
[ Power:12V/110W ]
It shine so very bright emission of heat generation 110W maximum output.
The diameter of a rated point cannot be visually checked.
[ Power:12V/110W Used the protective glass. ]
Then attached protective glasses are used,
positioning of an irradiation point can be performed easily visually.
Focal length and focus diameter of the Halogen Pont Heater HPH-35
【Lab kit packing product】
- Air cool type small Halogen Point Heater HPH-35CA/f15/12V-110W/P1m
Heating the subject with 110W. - Manual lift.
Up and down 80 mm by 16 rotating knobs, the accuracy is 0.5 mm.
Manual lift. Platform surface is 100mm x 100mm, - Square Australia Brick.It is useful when place the test piece.
- Heater mounting bracket
- Test stand
- Power cable for heater controller
- Manual variable power supply HCV-AC100-240V/DC12V-300W
Input voltage in the range of AC100V-AC240V.
The output adjustable range DC0V ～ 12V.
Easily changing the heat power (wattage) by slide transformer. - Safety glasses against high intensity light
It can visually check the high-intensity irradiation point at maximum output.
*In addition to the above, compressed air for cooling is required for use.
Related page:
