Air Blow Heater for Super breeze

●Feature of the Air Blow Heater for Super breeze

• We were callange the limit of the Air Blow heater.The breeze heating for 250 cc=0.25 liter per minute which was impossible until now was realized.
• Accurate temperature control can be performed using the thermocouple of the output port.
• Since the internal thread is cut at the tip, various metal fittings can be attached.
• The ABH-10S series has a metal pipe case of various length.
• The ABH-10S series has a ceramics paper protection pipe for incident accident countermeasures
• The ABH-10S series can watch heating element temperature by safe measures for prevent overheat.

1. For the oxygen shield of semiconductor heating
2. For the oxygen shield of brazing and soldere
3. For the air transport of powder metal 3D printer
4. For the gas heating of medical equipment
5. For the pre-heating of the film

◆The ABH-10S series has a metal pipe case of various length.

◆The ABH-10S series has a ceramics paper protection pipe for incident accident countermeasures

*1 Heating wires are used in Air Blow Heater has the most durable in the oxidizing atmosphere.
ABH types are in direct contact with the gas so that the heating wire, high heat transfer efficiency,
high temperature (800 ℃ approximately) can be obtained.
*2 ABH type is used for argon and nitrogen, compared to the air life tend to be shorter.

1. Hot air blow output
2. Screw for attachment
3. Thermocouple for output air temperature
4. Metal case stainless SUS304
5. Heat tube Quartz glass
6. Heat element Fe-Cr-Al alloy
7. Thermocouple for heat element
8. Insulation Alumina ceramics
9. Mount base Steatite
10. Insulating silicon rubber
11. Power wire Glass cloth or Silicon rubber
12. Thermocouple for output air Glass cloth or Silicon rubber
13. Thermocouple for heat element Glass cloth or Silicon rubber
14. Air input connector Nickel plated Brass

Air Blow Heater for Super breeze

PDF Catalog Download