[ Problem Point ] There is no good method of observing the process of heating. and We were in trouble. [ ⇒Kaizen Point ] The halogen ring heater with a ring hood was used. It was smoothly heated in a ...

[ Problem Point ] There was no good method of carrying out high temperature heating of the pipe. and We were in trouble. [ ⇒Kaizen Point ] The halogen ring heater with a ring hood was used. It was smoothly ...

[ Problem Point ] Write notes to the sample in the test, It was in trouble if there is no heat resistance on scratch paper. [ Kaizen Point ] Use the ToughTape, wrote a memo in magic from above. Notes ...

[ Problem Point ] In order that there might not be heat resistance and radiation resistance in a mask stop tape, when it exposed several times, distortion arose. [ Kaizen Point ] The mask stop was carried out on the ...

[ Problem Point ] The insulation for protecting from the mistake touch under assembly is required. [ Kaizen Point ] Insulated protection was carried out on the Toughtape. Reliability improved by the sufficient insulation and radiation resistance of PEEK resin.

[ Problem Point ] A pole crosses between the commutator fragment of rotter, time, it was in trouble about degradation early stage of a interlayer insulation thing by impulse wave discharge. [ Kaizen Point ] Insulated protection was carried out ...

[ Problem Point ] Heat resistance is required to protect a golden terminal from cream solder. [ Kaizen Point ] The Toughtape was used and masked. It is improvement in reliability at sufficient heat resistance.

[ Problem Point ] Degradation would be a problem early for a high fever near the engine. [ Kaizen Point ] It banded together using the Toughtape corresponding to 260 ℃ of high fever. Since after heating has stable adhesive ...

[ Problem Point ] The inside of a constant temperature bath cannot perform a temporary attachment in a high fever. [ Kaizen Point ] The temporary attached by the Toughtape. Work became easy and working efficiency increased.

[ Problem Point ] The quality of an insulator needs to be inserted because of rare short prevention. [ Kaizen Point ] Insulated protection was carried out on the Toughtape. Reliability improved by sufficient insulation and radiation resistance.

[ Problem Point ] High fever immediately after production, Kanban can not be pasted. [ Kaizen Point ] Kanban is pasted on Toughtape. Kanban production system expression fill the gap.

[ Problem Point ] A weather strip did not go well, but water infiltrated into sterilizing an instrument in steam. [ Kaizen Point ] That the seal-up in Toughtape. A weather strip did not go well, but water infiltrated into ...

[ Problem Point ] The position shifted and it was troubled by the exposure examination. [ Kaizen Point ] The temporary attached by the Toughtape. The shape is strong in 260 ℃ of permanent heat-resistance and radiation, and stable, so ...

[ Problem Point ] Instrument could not be fixed temporarily during construction of the boiler [ Kaizen Point ] The temporary attached by the Toughtape. Because the shape is stable and resistant to heat and humidity of a permanent 260 ...

[ Problem Point ] I was in trouble because it wasn’t possible to stand outside the Viola bottle against not to cork and to boil. [ Kaizen Point ] Bundle with the Toughtape. Because the shape is stable and resistant ...

[ Problem Point ] It takes time before glue dries. [ Kaizen Point ] The solar panel was stopped on the frame on the Toughtape. Since the lasting heat resistance of 260 ℃ and form are stable, fixation is possible ...

[ Problem Point ] For lack of heat resistance, splice unsuccessful. [ Kaizen Point ] It was spliced using the Toughtape.The shape was stable by 260 ℃ of resistance to distortion at high temperatures, so splice work became smooth, and ...

[ Problem Point ] The end stop tape dissolved for thermal storage of a film, and poor adherence occurred for the product. [ Kaizen Point ] The end stop was carried out on the Toughtape. Since form was stable in ...

[ Problem Point ] For lack of heat resistance, splice unsuccessful. [ Kaizen Point ] It was spliced using the Toughtape. The shape was stable by 260 ℃ of resistance to distortion at high temperatures, so splice work became smooth, ...

Relay Output and Detect Oil Film on the Water. Stable and can be detected in liquid shake. The power supply, DC24V, AC110/220V, AC120/240V can also be produced. Changes in the capacitance detection electrode, and water to determine the oil film. ...

[ Problem Point ] There was no method of building a boiled egg with soft white and hard yellow by a dry method. [ ⇒Kaizen Point ] The halogen ring heater with a dome hood was used. The boiled egg ...

[ Problem Point ] There is no good method of observing the process of heating safely. and We were in trouble. [ ⇒Kaizen Point ] The halogen ring heater with a ring hood was used. The test tube has been ...

[ Problem Point ] There is no good method of observing the process of heating. and We were in trouble. [ ⇒Kaizen Point ] The halogen ring heater with a ring hood was used. Since the test piece inserted from ...

[ Problem Point ] There is no good method of carrying out circular high temperature heating. and We were in trouble. [ ⇒Kaizen Point ] The halogen ring heater with a ring hood was used. It was smoothly heated in ...

[ Problem Point ] There is no better way to heat evenly from the periphery. and We were in trouble. [ ⇒Kaizen Point ] The halogen ring heater with a ring hood was used. It was fitted to the expansion ...