Home / News Letter / Heat-tech News Letter – Vol. 007

Heat-tech News Letter – Vol. 007

□■ Heat-tech News Letter – Vol. 007 2015-01-15


■1. Guidance of the new product

■2. Guidance of new applications

■3. Movie Library

■4. Support Information

■5. Editor’s note

■1. Guidance of the new product

1-1) [ Ultra-compact DC power Air Blow Heater ] We line up the Ultra-compact DC power Air Blow Heater.
>>> https://heater.heat-tech.biz/air-blow-heater/product-air-blow-heater/10964.html

Based on the needs of our customers, we line up the DC12v type and DC24 type in hot air heater.
It is most suitable for small inspection equipment.

1-1) [ Step Set Controller Profile-maker SSC series ] We have developed a new one.
>>> https://heater.heat-tech.biz/air-blow-heater/product-air-blow-heater/11562.html

We developed a “step set controller SSC Series” at the request of the more advanced heating test!
Profile-maker SSC series can configure advanced heating conditions, condition setting and checking and recording, is the heater controller of a triple role.
In addition to the profile settings, was also equipped with a hybrid function to control the two types of heater at the same time.
Using the hybrid function that can heat a combination of hot air heater and halogen heater, you can accelerate the drying work and fusion experiments and performance test.

■2. Guidance of the new applications

2-1) [ Step Set Controller Applications No.1 ] Temperature performance evaluation test of the rechargeable battery
This controller is to reproduce the rapid temperature changes, and proposes a performance evaluation to clarify the dynamic characteristics.
>>> https://heater.heat-tech.biz/air-blow-heater/best-applications-list-air-blow-heater/10204.html

2-2) [ Step Set Controller Applications No.2 ] Temperature drift test of electronic device by the Air Blow Heater
We propose to automate the performance evaluation test cycle of rising temperature and cooling.
>>> https://heater.heat-tech.biz/air-blow-heater/ssc-tips/11705.html

2-3) [ Step Set Controller Applications No.3 ] Diffusion annealing test of steel material
We propose a heat cycle setting of diffusion annealing.
>>> https://heater.heat-tech.biz/air-blow-heater/ssc-tips/11721.html

■3. Movie Library

3-1) [ Air Blow Heater Movie Library ] >>> https://heater.heat-tech.biz/category/air-blow-heater/movie/
Hot-air drying of the glass bottle
Hot-air heating of the chocolate bar
Hot-air heating of the biscuits
Hot-air heating of the Potato chips
Hot-air heating of the Bread
Hot-air heating of the Shrimp crackers
Heat resistance test of hot water cutting holes in the cup chow mein
Deburring of ABS resin
Forcing test of the plant – heating of pine cones

3-2) [ Halogen Point Heater Movie Library ] >>> https://heater.heat-tech.biz/category/halogen-point-heater/movie-halogen-point-heater/
Heating of the head of iron nails
Heating of the refractory brick
Heating of the tile
Dissolution of tin
Heating of the metal cap
Heating of the nut with washer
Heating of the Ring washer
Heating, melting and vitrification of rocks series 1 The fine grain sand of Kobe Maiko beach
Heating, melting and vitrification of rocks series 2 The medium grain sand of Kobe Maiko beach
Heating, melting and vitrification of rocks series 3 Sandstone
Heating, melting and vitrification of rocks series 4 Turbidite
Heating, melting and vitrification of rocks series 5 Conglomerate stone
Heating, melting and vitrification of rocks series 6 Pink-Granite
Heating, melting and vitrification of rocks series 7 Basalt
Heating, melting and vitrification of rocks series 8 Limestone

3-3) [ Halogen Line Heater Movie Library ] >>> https://heater.heat-tech.biz/category/halogen-line-heater/movie-halogen-line-heater/
Branding and Stencil of wood
Heating of the stainless steel plate for floors
Heating of rubber 100 ℃ and 200 ℃
Heating of carbon-fiber-reinforced plastic,CFRP

■4. Support Information

[ Online Seminar ] We have released the 3rd chapter of the “Science of the drying”.
Please check we have briefly discussed the principle of drying.
>>> https://heater.heat-tech.biz/air-blow-heater/science-of-the-drying/6983.html

Science of the drying – Table of Contents

 4.How does Hot air drying progress?

4-1.The air and the nitrogen
4-2.Drying speed and wind speed of the hot air
4-3.Drying speed and temperature of the hot air
4-4.Drying speed and swept area of the hot air
4-5.Drying speed and angle of the hot air

5.How does Infrared ray drying progress?

5-1.Infrared rays wavelengths and water
5-2.Heat balance equation of Infrared ray drying
5-3.Efficient method of Infrared ray drying

6.The hot air drying and the infrared ray drying – combination of convection heat transfer drying and radiation heat transfer drying

6-1.The most efficient drying method-Combination of the hot air drying and the infrared ray drying

■5. Editor’s note
Winter is suitable for the development and the video record of the high temperature heater.
Upon exiting the outdoors from the hot laboratory, I feel cool and pleasant.
Our company, “Any time the summer.”


■ To cancel your subscription, enter the registered email address in the Cancel Newsletter sign-up space provided and click Cancel.
■ The termination procedure later, the newsletter is doing the delivery already prepared, there are times when it is delivered.

■ Please contact us at the following address opinions and requests to this email.

* Are subject to change without any prior notice that it is provided.
* It is strictly prohibited by any means without prior permission to duplicate on an article published in Heat-tech News Letter, to reprint.

[Published by] Heat-Tech Co., Ltd.
〒655-0037 2-7-14 Utashikiyama Tarumi Kobe Japan

Copyright (c) 2013 Heat-tech Co., Ltd. All rights reserved.