Home / Air Blow Cooler / products / Air Blow Cooler controller ACC Series

Air Blow Cooler controller ACC Series

[Attention]
ACC series can not control the Air Blow heater.
The control of the Air Blow Heater recommends HCA series, AHC2 series, and SSC series.
ACC series can not control the halogen heater.
The control of the halogen heater recommends HCV series, HHC2 series, and SSC series.

Air Blow Cooler controller ACC Series

ACC performs stable cooling control by feedback control using a thermocouple.

Air Blow Cooler controller ACC Series

[Specifications ]

D/#Features
ACC-0.7MPa-300LTemperature controller surface mounted
ACC/P-0.7MPa-300LTemperature controller and pressure gauge surface mounted
ACC/P/FM-0.7MPa-300LTemperature controller, pressure gauge and flow meter surface mounted

Options

D/#Item and Description
TP Thermo controller : Pyrometer input
TMR1 Mounting surface.-For one-shot cooling
TMR2 Mounting surface.-For thermal holding time
TMR3 Mounting surface.-cooling time for the predictive maintenance
RC1 Cooling start or stop in the signal from outside
RC2 Specified output voltage in 4-20mA from outside
RSP Specified thermocontroller temp. in 4-20mA
MON Monitor, Output 4-20mA signal the temperature of the cooling object.
RS485 RS-485 Communication
IOT IOT function
TCB Thermocouple break alarm
AP Cooling air pressure shortage alarm
FPR Front Protection Rail
RPR Rear Protection Rail
PM Pyrometer mounted surface.
FX570 Flexible Stand for Pyrometer
Pyrometer Pyrometer to choice of applications, and then fitted adjusted to the heater controller.
Power Cable Manufacture the specification of the power cable.
 +α If user need a function other than the above, please contact us.
[Note] When the to add a function, there is that the external dimensions changes.

Standard type ACC

Air Blow Cooler controller ACC Series

ACC has a separate main power switch and cooler start switch, so user can start cooling after setting the temperature.
And, it is possible to report that the cooling temperature has not been reached as an option.
In addition, the jetting temperature can be externally output to 4-20mA as an option.

Air Blow Cooler controller ACC Series

Built-in pressure gauge ACC/P

Air Blow Cooler controller ACC Series

ACC/P has a separate main power switch and cooler start switch, so user can start cooling after setting the temperature.
And, it is possible to report that the cooling temperature has not been reached as an option.
In addition, the jetting temperature can be externally output to 4-20mA as an option.

The ACC/P is equipped with a pressure gauge so that user can visually check the pressure.
And, a pressure shortage alarm can be issued.
In addition, the pressure can be externally output to 4-20mA as an option.

Air Blow Cooler controller ACC Series

Built-in pressure gauge and flowmeter ACC/P/FM

Air Blow Cooler controller ACC Series

ACC/P/FM has a separate main power switch and cooler start switch, so user can start cooling after setting the temperature.
And, it is possible to report that the cooling temperature has not been reached as an option.
In addition, the jetting temperature can be externally output to 4-20mA as an option.

The ACC/P/FM is equipped with a pressure gauge so that user can visually check the pressure.
And, a pressure shortage alarm can be issued.
In addition, the pressure can be externally output to 4-20mA as an option.

The ACC/P/FM is equipped with a flow meter to visually check the flow rate.
And, a flow rate shortage alarm can be issued.
In addition, the flow rate can be externally output to 4-20mA as an option.

Air Blow Cooler controller ACC Series

Catalog

PDF Catalog Download
PDF Catalog Download

contact us