Carbon Line Heater CFLH-40 series

INDEX

1.Features of CFLH-40
2.Outline photograph of CFLH-40
3.Focal length and focal width of CFLH-40
4.Temperature rising time of CFLH-40
5.Manual control → HCVD series
6.Automatic temperature control → HHC2 series
7.Configuration of CFLH-40
8.Outline drawing of CFLH-40

1.Features of CFLH-40

1.Emits mid-infrared rays close to the absorption wavelength of water

When the heating element temperature is set to 700°C, the peak wavelength of the radiant energy is approximately 3μm, making it ideal for heating water droplets, aqueous solutions, and other hydrated compounds.

2. Ideal for resin heating

Since it is a carbon fiber heating element derived from a polymer compound, it is good at heating resin.

3. Quick start-up

Reaching 80% in just 2.7 second and 100% in 8.5 seconds.

4. Free heating direction

Since the heating element is made of flexible material, it can be processed into line or ring shapes.
The heating element itself is lightweight and can be lit in any direction, vertically, horizontally or diagonally.
Moreover, it has excellent impact resistance.

2.Outline photograph of CFLH-40

3.Focal length and focal width of CFLH-40

This is a thermal image of heat-resistant brick irradiated from a distance of 45 mm.
The thermal image is divided into 10 by the condenser mirror range (320mmx40mm) of the halogen line heater CFLH-40,
Divide the maximum temperature of each divided range by the maximum temperature of the entire range to quantify the temperature distribution of the heat-resistant bricks.

Since the incident heat is dissipated to the outside, the temperature decreases toward the outside.

4.Temperature rising time of CFLH-40

【please note】
In infrared heating, the heating temperature changes depending on the infrared absorption rate of the object.
The closer the heating distance, the higher the temperature.
The longer the heating time, the higher the temperature.