User can easily use the Air Blow Heater by using our heater controller.

The heater controller HCA can easily control the temperature simply by connecting the Air Blow Heater via the controller.

The heater controller HCAFM is a model in which a flow meter is added to the HCA, and temperature control and flow control can be easily performed with one unit.

Precautions when using the temperature controller

If the amount of gas supplied to the Air Blow Heater is extremely small, there will be an error between the heating element temperature inside the pipe and the temperature of the temperature controller (hot air temperature/ thermocouple temperature). The temperature of the temperature controller (hot air temperature / thermocouple temperature) is displayed lower than the heating element temperature, and it burns out in a short time. The thermocouple at the hot air outlet senses the temperature of the hot air heated by the heating element. If the gas flow rate is extremely low, the hot air heated by the heating element temperature will not reach the thermocouple at the hot air outlet, resulting in an error.Check the minimum flow rate and supply the flow rate multiplied by the safety factor twice.