products

For use exclusively with medium and large size Air Blow Heaters. When combined with a hot air outlet fitting,it blow hot air from 4 sides. Please place it into a pipe or hole and use for heating or drying. After ...

The Air Blow Heater can be sprayed vertically. Replaces Bunsen burners. Also available with a stop valve (cock).

●Feature of the High temperatur parallel large size Air Blow Heater ABH-28AMX ABH-28AMX is a Air Blow Heater assembled with 3 or 6 ABH-28AM3 units. ABH-28AMX can heat passage gas to 900℃ Accurate temperature control can be performed using the ...

●Feature of the High temperatur high power Air Blow Heater ABH-28A ABH-28A can heat passage gas to 1050℃ A heating element of 7.6kw was included in a metal pipe case of φ 28. When high temp. air 125ℓ/min is necessary, ...

●Feature of the High temperatur medium size Air Blow Heater ABH-22A ABH-22A can heat passage gas to 1050℃ A heating element of 5kW was included in a metal pipe case of φ 22. When high temp. air 100ℓ/min is necessary, ...

1.Feature of the High temperatur medium size Air Blow Heater ABH-HR ABH-HR can heat passage gas to 1050℃ ABH-HR can heat gas in an environment of 200 ° C ABH-HR can discharge high temperature air up to 1000 ℃. ABH-HR ...

●Feature of the High temperatur small size Air Blow Heater ABH-19A ABH-19A can heat passage gas to 1050℃ A heating element of 5kW was included in a metal pipe case of φ 19. When high temp. air 30～160ℓ/min is necessary, ...

●Feature of the High temperatur small size Air Blow Heater ABH-11NM ABH-11NM can heat passage gas to 1000℃ A heating element of 170w～1400w was included in a metal pipe case of φ 10.5 When high temp. air 5～35ℓ/min is necessary, ...

Manufacture the specification of the power cable. When the plug or the connector which the upper figure does not have are necessary, we will manufacture as much as possible. << Quotation model specification method >> (Heater controller model) – (Plug ...

[ CTS-L & CTS-M ] [ CTS-M + HLH-65W ] * Refractory brick, Manual lifting table and Heat resistant plate are optional. [ CTS-M + HPH-160 ] * Refractory brick, Manual lifting table and Heat resistant plate are optional.

[Attention] HCA series can not control the halogen heater. The control of the halogen heater recommends HCV series, HHC2 series, and SSC series. HCA has a built-in high-performance temperature controller, handling is easy. *HCA has initially set to AT2 (Stability). ...

Condition setting, confirmation and recording, the heater controller of 3 function 1 equipment. Profile-maker SSC series Memory card data folder function Read the heating data from the memory card, and can edit the tables and graphs in EXCEL. Heating data ...

 【Feature】 HHC 2 is a heater controller that combines options with basic functions and is customized for use. Color universal design type can be specified CUD as an option. White, blue and yellow indicator lights, Blue and Yellow operation ...

This fix the Air Blow Heater and Halogen Heater in equipment. [Applications 1. Air Blow Heater stand]

This fix the Air Blow Heater to equipment.  

Flexible Stand Equipment can be installed in a flexible, user can blow and irradiation, where aimed. User can shorten the setting time of the various experiments. [Applications] For radiation thermometer ※　Mounting equipment, please use the insure-locks or the hose band.

■Model selection and so on Q:How can I determine the type of Air Blow Heater? A:Please check with the Air Blow Heater model selection site. Q:Is there A:Air Blow Heater that can use A:DC power supply? A:Yes available. Please check ...

Custom-designed will produce the protection tube according to the outside diameter and the length. Ceramic paper of heatproof 1250℃ was used. It becomes dangerous prevention in the Miss touch for a short time that though it is felt it is ...

It’s most suitable for heating of filamentous work difficult so far. The width of the balloon are 10mm, 15mm and 18.5mm types. Moreover, it is possible to use it as a spatula of air. PDF Catalog Download

It can use ABH 口v-□w/10PS. The best for pinpoint heating, difficult until now. Complete lineup to Φ1.0 – Φ6.0 outer diameter. Please use for detailed technical processing and device heating of a printed circuit board. 【 For under 100℃】 【 ...

●Feature of the Platinum heating element Air Blow Heater PTH-13N PTH is a Air Blow Heater using a platinum rhodium alloy heating element. Since the platinum alloy heating element generates heat up to 1700 ℃, high temperature hot air of ...

●Feature of the Clean-room & Semiconductor Air Blow Heater DGH-140X6 The DGH series heating element and sensor are also sealed in a capsule of quartz glass. Neither the heating element nor the sensor in direct contact with the heated gas. ...

●Feature of the Clean-room & Semiconductor Air Blow Heater DGH-102X6 The DGH series heating element and sensor are also sealed in a capsule of quartz glass. Neither the heating element nor the sensor in direct contact with the heated gas. ...

●Feature of the Clean-room & Semiconductor Air Blow Heater DGH-50NM The DGH series heating element and sensor are also sealed in a capsule of quartz glass. Neither the heating element nor the sensor in direct contact with the heated gas. ...

●Feature of the Clean-room & Semiconductor Air Blow Heater DGH-43NM The DGH series heating element and sensor are also sealed in a capsule of quartz glass. Neither the heating element nor the sensor in direct contact with the heated gas. ...