Electric

[ Problem Point ] Rubber was not drying, and it was troubled by the temperature close to the sub-zero winter. [ ⇒Kaizen Point ] It was heated by the far-infrared heater which temperature rise of the high speed. Rise time ...

[ Problem Point ] Could not be heated the dummy gas to evaluate the performance of the catalyst. [ ⇒Kaizen Point ] The double glazing tube specification DGH type for medicine-proof of the Air Blow Heater was used, and it ...

[ Problem Point ] There was no non-contact heater that can be accurately temperature control. [ ⇒Kaizen Point ] We were heated in the Air Blow Heater. In the hot air that was temperature-controlled exactly, we were able to be ...

[ Problem Point ] There was no the Air Blow Heater that can be heated in a nitrogen breeze. [ ⇒Kaizen Point ] We were heated in the breeze by the Air Blow Heater ABH100v-50w/10PS. It is possible to heat ...

[ Problem Point ] We were looking for can be radiation drying extensively, the heater of powder metals, at high temperatures. [ ⇒Kaizen Point ] We used surface heating type of the Halogen Line Heater.Because it is radiation heating, and ...

[ Problem Point ] There is no good method of carrying out circular high temperature heating. and We were in trouble. [ ⇒Kaizen Point ] The halogen ring heater with a ring hood was used. It was smoothly heated in ...

[ Problem Point ] There is no better way to heat evenly from the periphery. and We were in trouble. [ ⇒Kaizen Point ] The halogen ring heater with a ring hood was used. It was fitted to the expansion ...

[ Problem Point ] There is no better way to heat evenly from the periphery. and We were in trouble. [ ⇒Kaizen Point ] The halogen ring heater with a ring hood was used. From the feed port, it is ...

[ Problem Point ] There is no high speed heater of the corresponding to an index table, and We were in trouble. [ ⇒Kaizen Point ] Using a halogen ring heater with a reflector. Since the standup was speedy, the ...

[ Problem Point ] There is no good way to small and wide heating and We were in trouble. [ ⇒Kaizen Point ] The ring heater which can carry out wide heating of the wide area was introduced. The efficiency ...

[ Problem Point ] There is no good method of heat the small printed circuit board and We were in trouble. [ ⇒Kaizen Point ] The ring heater which can carry out uniform heating of the wide area was introduced. ...

[ Problem Point ] There is no good method of heating from all direction. and We were in trouble. [ ⇒Kaizen Point ] Shrinking heating was carried out with the halogen ring heater. Since it heated from all the circumferences, ...

[ Problem Point ] The wire did not fit, it was troubled by the temperature near the freezing point of winter. [ ⇒Kaizen Point ] It warmed by the Super Infrared Heater of temperature up at the moment. The wire ...

[ Problem Point ] The performance of the battery did not come out but it was troubled by the temperature near the freezing point of winter. [ ⇒Kaizen Point ] It warmed by the Super Infrared Heater of temperature up ...

[ Problem Point ] The marks of water drop remained and were worrisome when natural drying was carried out. [ ⇒Kaizen Point ] Nitrogen was heated with the Air Blow Heater and it dried. The marks of water drop were ...

[ Problem Point ] When processing the wire produced by powder metallurgy,it had trouble to cracking or cutting. [ ⇒Kaizen Point ] So brittle,while heating to the processing 400 ℃ – 700 ℃ by the Air Blow Heater. The quality ...

[ Problem Point ] We have no idea about how to no-contact heating in line. [ ⇒Kaizen Point ] The high temperature air of the suitable temperature was made with the Air Blow Hater and it projected. It came to ...

[ Problem Point ] We have no idea about how to heating and cooling at the same time in line. [ ⇒Kaizen Point ] It made high fever air of a suitable temperature with the Air Blow Heater, projected and ...

[ Problem Point ] There was distance from a boiler,it was in trouble because the temperature of the steam fell. [ ⇒Kaizen Point ] Steam has overheated with the Air Blow Heater. It is possible to make overheating saturated steam ...

[ Problem Point ] It was in trouble because the priority oxidation of the tin occurred. [ ⇒Kaizen Point ] The soldering iron shielded with the nitrogen gas was made. The priority oxidation of tin is suppressed to solder in ...

[ Problem Point ] It was in trouble because the temperature of the boiler steam didn’t rise. [ ⇒Kaizen Point ] Steam was heated by the Air Blow Heater. Wet steam became dry steam.

[ Problem Point ] We have no idea to concentrate without oxygen. [ ⇒Kaizen Point ] Nitrogen gas was blown into a sample directly and it was concentrated. The volatile low solvent like DMSO and water could also be concentrated ...

[ Problem Point ] We have no idea about Silicon wafer easy heating. [ ⇒Kaizen Point ] The high temperature Nitrogen gas was injected with the Air Blow Heater, and the top surface temperature was adjusted to 40O℃. The Silicon ...

[ Problem Point ] There were no tools in which small high-temperature tunnel furnace heat source,  and We were in trouble. [ ⇒Kaizen Point ] In a large the high-temperature heating with the Air Blow Heater capacity. Since raising the ...

[ Problem Point ] There were no tools in which no fast way of drying the metal parts,  and We were in trouble. [ ⇒Kaizen Point ] In a large the high-temperature heating with the Air Blow Heater capacity. Work in ...