Home / Halogen Point Heater / products / Super Small Halogen Point Heater HPH-18

Super Small Halogen Point Heater HPH-18

Features of HPH-18

1. Features of HPH-18

1. Selectable Focal Lengths
4 focusing mirrors with focal lengths of 5 mm, 10 mm, 15 mm, and 20 mm are available. Select the optimum focal length for your application.

2. Compact Design
The heater has a compact body with a diameter of only φ18 mm. It can be installed in confined spaces and is ideal for integration into equipment.

3. High-Density Localized Heating
With the 5 mm focal length focusing mirror, infrared radiation is focused into a spot approximately φ2 mm in diameter, enabling high-density localized heating up to approximately 890°C.

4. Rapid Heating
With the 5 mm focal length focusing mirror, the heater reaches approximately 800°C in about 5 seconds after heating starts, providing excellent heating response.

5. Suitable for Moving Applications
The heater can be operated in any orientation, making it suitable for installation on moving equipment and for heating while in motion.
When installing on moving equipment, be sure to provide vibration and shock protection to prevent damage caused by impact during operation or when stopping.

6. Suitable for Vacuum Environments
The non-contact infrared heating method allows use in vacuum environments. Before initial use, perform vacuum bake-out, as a small amount of gas may be released from the inorganic adhesive.

2. Focal Length and Focal Diameter of HPH-18

Focal Length and Focal Diameter of HPH-18

Focal Length and Focal Diameter of HPH-18

The heating area can be adjusted by changing the distance from the focal position.

3. Temperature rising time of HPH-18

Temperature rising time of HPH-18

Shorter focal lengths provide faster heating to higher temperatures.

4. Voltage and lifetime of HPH-18

Voltage and lifetime of HPH-18

As shown above, operating at a voltage 10% below the rated voltage extends the design life by approximately 3 times, while operating at 20% below the rated voltage extends it by approximately 9 times.

5. Manual Control Controller → HCV Series

Manual Control Controller → HCV Series

For manual control of the HPH-18, use the HCV Series controller.

Go to the HCV series site

6. Automatic Temperature Control Controller → HHC2 Series

Automatic Temperature Control Controller → HHC2 Series

For automatic temperature control of the HPH-18, use the HHC2 Series controller. By combining it with a radiation thermometer or other temperature measurement device, the temperature of the target can be measured and automatically controlled in real time.

Go to the HHC2 series site

7. HPH-18 Model Configuration

The HPH-18 can be configured by combining one of three focusing mirror models with a lamp base and specifying the lead wire length.

HPH-18 Model Configuration

8. Outline drawing of HPH-18

Outline drawing of HPH-18

Outline drawing of HPH-18

Outline drawing of HPH-18

Outline drawing of HPH-18

 

PDF Catalog Download

PDF Catalog Download

 

Halogen Point Heater Apps

contact us