[ Problem Point ] We have no way to the drawing press wrinkle. [ ⇒Kaizen Point ] Preheated metal material by the Halogen Line Heater. Since the maximum temperature heated up in 5sec, immediately after the start of operation could ...

[ Problem Point ] The conventional method was in trouble because it contains metal ions in dry air. [ ⇒Kaizen Point ] Heated and dried in the Air Blow Heater designed for clean room. Since heating the coated glass,and metal ...

[ Problem Point ] We have trouble to the die temperature drift for changes in precision finishing. [ ⇒Kaizen Point ] Preheated die by the Halogen Line Heater. Since the maximum temperature heated up in 5sec, immediately after the start ...

[ Problem Point ] We used the industry dryer. Unable to fine temperature control was a problem. [ ⇒Kaizen Point ] Heated and dried in large type the Air Blow Heater. Dehumidification and sufficient quality of injection molded raised in ...

[ Problem Point ] It is very difficult to annealing temperature control. [ ⇒Kaizen Point ] Heated by the Halogen Line Heater casting surface. Since the maximum temperature heated up in 5sec, immediately after the start of operation could work.The ...

[ Problem Point ] We used the industry dryer. Unable to fine temperature control was a problem. [ ⇒Kaizen Point ] Heated only the surface by the small calorie by the Air Blow Heater and made them shrink. Does not ...

[ Problem Point ] We have no idea about how to heat in the vacuum chamber. [ ⇒Kaizen Point ] Heated by the Halogen Line Heater. Since the maximum temperature heated up in 5sec, immediately after the start of operation ...

[ Problem Point ] Had trouble peeling off the seal is broken at the end. [ ⇒Kaizen Point ] A spot was heated by the Air Blow Heater and the glue was made soft. The productivity came off well,and improved.

[ Problem Point ] Rising of the heater is slow, the heat activity is bad. [ ⇒Kaizen Point ] Heated by the Halogen Line Heater. Since the maximum temperature heated up in 5sec, immediately after the start of operation could ...

[ Problem Point ] The ammonia gas was dangerous,so it couldn’t be heated safely and I was in trouble. [ ⇒Kaizen Point ] It was heated airtightly by a DGH series of the Air Blow Heater. An experiment heated it ...

[ Problem Point ] Rising of the heater is slow, the productivity is bad. [ ⇒Kaizen Point ] Heated by the Halogen Line Heater. Since the maximum temperature heated up in 5sec, immediately after the start of operation could work.The ...

[ Problem Point ] There was no suitable one to check the thermal distortion of liquid crystal. [ ⇒Kaizen Point ] It was necessary to do 100% inspection and an image processing machine was adopted, so the central part was ...

[ Problem Point ] Glass plate couldn’t interfere and heat the inner resin in a suitable temperature. [ ⇒Kaizen Point ] Passes through the glass , it was heated by the Halogen Line Heater. The product fineness has improved because ...

[ Problem Point ] Until now had been roasted in the flames of gas pipe where the gas had no trouble using the impossible. [ ⇒Kaizen Point ] The Air Blow Heater to heat sterilization at high temperatures. If it ...

[ Problem Point ] Glass plate couldn’t interfere and heat the inner resin in a suitable temperature. [ ⇒Kaizen Point ] Passes through the glass,it was heated by the Halogen Line Heater. The product fineness has improved because the temperature ...

[ Problem Point ] Until now we had a filter on the decontamination of heavy equipment. [ ⇒Kaizen Point ] The Air Blow Heater to heat sterilization. So small,now can be used anywhere in the air sterilization.

[ Problem Point ] We have no idea about how to lead-free soldering of printed circuit boards. [ ⇒Kaizen Point ] Passes through the glass , it was heated by the Halogen Line Heater. The product fineness has improved because ...

[ Problem Point ] The thermostat tank is used so far,so partial heating of a culture medium isn’t done. [ ⇒Kaizen Point ] The spot was heated by the Air Blow Heater. Differential expression changes in the growth of species ...

[ Problem Point ] Glass plate couldn’t interfere and heat sterilization the inner bacteria in the suitable temperature. [ ⇒Kaizen Point ] Passes through the glass , it was heated by the Halogen Line Heater. The product fineness has improved ...

[ Problem Point ] We were in trouble because we couldn’t do the heat cycle test by the real thing so far. [ ⇒Kaizen Point ] The test point was heated by the Air Blow Heater. Heat cycle testing could ...

[ Problem Point ] We have no way to small length=2.5m quickly high temperature heater. [ ⇒Kaizen Point ] The start was early and the process became smooth. The product fineness has improved because the temperature is changed by the ...

[ Problem Point ] We were in trouble about the former jig because we couldn’t test in multiple steps at the site. [ ⇒Kaizen Point ] Several step of temperature was heated by the Air Blow Heater and it was ...

[ Problem Point ] We have no way to small length=2.5m quickly high temperature heater. [ ⇒Kaizen Point ] Heated by the Halogen Line Heater reversible cloth. It is attached to the narrow place, and got cold so quickly, safety ...

[ Problem Point ] The sample was too big,and it couldn’t be stored in the thermostat tank,and we were in trouble. [ ⇒Kaizen Point ] The test point was heated by the Air Blow Heater. Heat cycle testing could be ...

[ Problem Point ] Rising of the heater is slow,it couldn’t balance with coating of shrink-proofed resin. [ ⇒Kaizen Point ] Dried by the Halogen Line Heater after coating fabric. Since the maximum temperature heated up in 5sec, immediately after ...