[ Problem Point ] It was in trouble because the temperature of the boiler steam didn’t rise. [ ⇒Kaizen Point ] Steam was heated by the Air Blow Heater. Wet steam became dry steam.

[ Problem Point ] We have no idea to concentrate without oxygen. [ ⇒Kaizen Point ] Nitrogen gas was blown into a sample directly and it was concentrated. The volatile low solvent like DMSO and water could also be concentrated ...

[ Problem Point ] We have no idea about Silicon wafer easy heating. [ ⇒Kaizen Point ] The high temperature Nitrogen gas was injected with the Air Blow Heater, and the top surface temperature was adjusted to 40O℃. The Silicon ...

[ Problem Point ] There were no tools in which small high-temperature tunnel furnace heat source,  and We were in trouble. [ ⇒Kaizen Point ] In a large the high-temperature heating with the Air Blow Heater capacity. Since raising the ...

[ Problem Point ] There were no tools in which no fast way of drying the metal parts,  and We were in trouble. [ ⇒Kaizen Point ] In a large the high-temperature heating with the Air Blow Heater capacity. Work in ...

[ Problem Point ]   There were no tools in which optimum temperature for heating the moving part,  and We were in trouble. [ ⇒Kaizen Point ] Heated in the Air Blow Heater. Mobility could be maintained without contact can ...

[ Problem Point ] There were no tools in which quickly dry water-based paint,  and We were in trouble. [ ⇒Kaizen Point ] In a large Air Blow Heater the blower at high temperature. Faster drying, increased production.

[ Problem Point ] If there is no way of drying the water as soon as the test was in trouble. [ ⇒Kaizen Point ] The high-temperature heating with the Air Blow Heater blower capacity. We can work faster, more ...

[ Problem Point ] The rapid heating is not possible to the chamber, had trouble. [ ⇒Kaizen Point ] In a large the Air Blow Heater warmed rapidly. The rise of the processing cycle time, significantly increasing the number of ...

[ Problem Point ] Flushing of chips remaining wash was in trouble. [ ⇒Kaizen Point ] In a large hot-air heating because the water flew residual. The prevention of water leakage in the next step. Eliminates the need for water ...

[ Problem Point ] Liquid left after molding process was in trouble. [ ⇒Kaizen Point ] The Air Blow Heater,it flew in the residual water and heat the air blow was coming out of rust.

[ Problem Point ] After washing the remaining pickling was in trouble. [ ⇒Kaizen Point ] The Air Blow Heater,it flew in the residual water and heat the air blow was coming out of rust.

[ Problem Point ] We were bagged and dried groceries. But there was trouble grows mold. [ ⇒Kaizen Point ] It dried heating nitrogen by the Air Blow Heater. Because nitrogen did not contain water vapor. It became the anti-mold ...

[ Problem Point ] It was in trouble because Flushing cleaning solution after plumbing processing was left. [ ⇒Kaizen Point ] Rust did not go out because it had dried remaining water by the Air Blow Heater.

[ Problem Point ] When cleaning after cutting chips, water drops were still in trouble. [ ⇒Kaizen Point ] The Air Blow Heater,attached to the needle nozzle,dry blower. Because the hot air blower hot moment, better drying.

[ Problem Point ] When the adhesive film and paper,air bubbles were made trouble. [ ⇒Kaizen Point ] Wide nozzle attached to the preheated the Air Blow Heater. To improve the adhesion of air bubbles disappeared.

[ Problem Point ] It’s being checked by the tester just after the production of electronic components. Control of the heat cycle was difficult. [ ⇒Kaizen Point ] Aging was done with a wide nozzle of the Air Blow Heater. ...

[ Problem Point ] We were bagged and dried groceries. But there was trouble grows mold. [ ⇒Kaizen Point ] It dried heating nitrogen by the Air Blow Heater. Because nitrogen did not contain water vapor. It became the anti-mold ...

The temperature of the hot air from theAir Blow Heater is T [℃], the gas flow rate is F [L / min.], And the power consumption of the Air Blow Heater is P [w]. Please be sure to double the ...

[ Problem Point ] Resin insulating coating was being used,so control of the dry temperature was difficult. [ ⇒Kaizen Point ] It dried spotting heating by the Air Blow Heater. The quality of the product has improved in the accurate ...

The withstand voltage of the Air Blow Heater is 0.3MPa for the H series and 0.4MPa for the S series. We can also manufacture the Air Blow Heater with higher withstand voltage by custom specifications. The discharge pressure displayed by ...

[ Problem Point ] Resin insulating coating was being used,so control of the dry temperature was difficult. [ ⇒Kaizen Point ] It dried spotting heating by the Air Blow Heater. The quality of the product has improved in the accurate ...

[ Problem Point ] We are looking for not emit gases high temperature heater. [ ⇒Kaizen Point ] Heated by the Halogen Line Heater. It does not emit gases, it can accurate analysis. The idling time vanished, the current spending ...

[ Problem Point ] Heat ran away from the furnace,was the problem of quenching quality. [ ⇒Kaizen Point ] The furnace was air sealed with the Air Blow Heater. The temperature of the interior was kept,and the quality of quenching ...

[ Problem Point ] We have no way to powerful irradiated lamp with infrared and ultraviolet. [ ⇒Kaizen Point ] Irradiated infrared by the Halogen Line Heater. Also UV lamp, the same type of custom-made ones. Since the maximum temperature ...