Home / HEAT-TECH info

Author Archives: HEAT-TECH info

No.19 Preheating of the Spin Coater Chuck Holder

[ Problem Point ] In order to improve the uniformity of the coating liquid, it was necessary to preheat the spin coater chuck holder to an appropriate temperature. However, the conventional heating method had issues such as slow temperature rise, ...

Read More »

No.18 Speeding up the Dehydration Bake

[ Problem Point ] In the dehydration bake process, shortening the drying time has become a critical issue. Traditional heaters had slow response times, and there were limitations to improving throughput. Additionally, there were issues with heat uniformity, leading to ...

Read More »

No.17 Drying of Temporary Fixing Adhesive

[ Problem Point ] In the drying process of temporary fixing adhesives, shortening the drying time has become an important issue. Traditional heaters had slow response times, and there were limitations to improving throughput. [ ⇒Kaizen Point ] By using ...

Read More »

No.16 Annealing Process of SiC Wafers

[ Problem Point ] The annealing process of SiC wafers requires uniform heating at high temperatures, while improving throughput remains a challenge. [ ⇒Kaizen Point ] By using the Carbon line heater, heating efficiency has improved. Throughput has increased, and ...

Read More »

No.15 Small Lot Drying of Resin Pellets

[ Problem Point ] In production environments with low-volume, high-mix production, the conventional drying methods using large hoppers and dryers presented a challenge. The traditional equipment processes large quantities of pellets at once, leading to excessive energy consumption for small ...

Read More »

No.14 Shortening the Drying Time of the Coater

[ Problem Point ] In the coating process, slow drying speed led to reduced production efficiency. Traditional drying methods required a long time to supply sufficient heat, limiting the throughput of the production line. Additionally, large drying equipment was necessary, ...

Read More »

No.13 Defrosting Freezer Warehouse Shutters

[ Problem Point ] Freezer warehouse shutters are prone to condensation due to temperature differences between the interior and exterior. This condensation freezes and turns into frost or ice, making it difficult to open and close the shutters. In winter ...

Read More »

7. Timing of Temperature Measurement and Its Impact

To improve the accuracy of temperature measurement, selecting the appropriate measurement timing is extremely important. Even for the same object, different temperatures may be observed due to factors such as the progress of heating or cooling, changes in the surrounding ...

Read More »

2. Types of Temperature Measurement Devices and How to Choose Them

To improve the accuracy and efficiency of temperature measurement, selecting the most suitable thermometer is crucial. There are various temperature measurement devices, each with unique characteristics and advantages. Choosing the right device enables more precise measurements, facilitating efficient energy and ...

Read More »

Introduction to Temperature Measurement – Table of contents

Table of Contents What is Temperature Measurement? Basic Knowledge and Importance Types of Temperature Measurement Devices and How to Choose Them Fundamental Error Factors Affecting Temperature Measurement and Countermeasures Measurement Errors Caused by Temperature Distribution Variations and Their Prevention Limitations ...

Read More »

No.16 Silicone tube bending processing

[ Problem Point ] With other heating methods, heat would spread excessively, sometimes reaching unnecessary parts of the tube. [ ⇒Kaizen Point ] Thanks to the precise heating of the halogen glass rod heater, the risk of heat spreading to ...

Read More »

Polyurethane Tube Joining by Infrared Localized Heating

This video introduces a polyurethane tube joining method using localized heating with a halogen glass rod heater. By focusing infrared radiation to achieve pinpoint heating, efficient heating and joining can be accomplished. With appropriate temperature control and heating condition adjustments, ...

Read More »