Welcome to Heat-tech Co.,Ltd. site! Non-touch High temp. and High speed heating
This site is to introduce a high-tech heater, heater controller and the peripheral technology realize a Non-contact High-temp. High speed heating. Please contact us for product information and technology information. This site is the online shop, customer can buy industrial instruments required by laboratories and factories at direct dealing on the internet. The customer of the first time dealings is very welcomed.
Realizes highly accurate pinpoint heating Direct heating of liquids with acid-resistant quartz glass High-temperature heating possible even in limited spaces or over long distances
Realizes highly accurate pinpoint heating High-temperature heating possible even in limited spaces or over long distances Direct heating of liquids with acid-resistant quartz glass
HPH-18L is the halogen point heater which condensing the infrared rays of the halogen bulb and heats at high temperature. The radiation pipe is mounted on the side. The condensing diameter is about φ2.5mm at a focal length of 9mm. It depends on the heating object HPH-18L is heatable to about 950 degrees Celsius.
For Far Infrared Point Heater FPH-30 It is a manual power supply controller of 6V DC type. The point heating of the far infrared ray which was impossible in the past can be controlled manually.
Condensing type Far-infrared Line Heater FLH-30 Series Ultra-compact. Height 36mm x Width 30mm x Length 50~318mm. Fast heating & Highly precise temperature control can be done.
Parallel beam type Far-infrared Line Heater FLH-35 Series Ultra-compact. Height 36mm x Width 35mm x Length 50~316mm. Fast heating & Highly precise temperature control can be done.
《 Problem Point 》 Could not be heated the dummy gas to evaluate the performance of the catalyst. 《 Kaizen Point 》 The double glazing tube specification DGH type for medicine-proof of the Air Blow Heater was used, and it heated from normal temperature to 550 ℃. The quality assessment in arbitrary temperature came made.
《 Problem Point 》 It was in trouble without a heater that can be synthesized ceramics in a short period of time. 《 Kaizen Point 》 Ceramics is heated at high output halogen point heater of 3kw. Ceramics was heated to a temperature which melts in a short time.
《 Problem Point 》 Rubber was not drying, and it was troubled by the temperature close to the sub-zero winter. 《 Kaizen Point 》 It was heated by the far-infrared heater which temperature rise of the high speed. Rise time is fast, tact time loss also do not mind idling time is zero. Heating area is wide, heating and drying was able to uniformly throughout. Radiation frequency band of infrared, so wide, I could be satisfied without replacing the heater also new material.
《 Problem Point 》 There is no good method of heating from all direction. and We were in trouble. 《 Kaizen Point 》 Shrinking heating was carried out with the halogen ring heater. Since it heated from all the circumferences, it has shrunk finely. The yield improved and amendment decreased.
《 Problem Point 》 We were looking for can be radiation uniformity, the heater of carbon fiber cloth, at high temperature for a short time. 《 Kaizen Point 》 We used combining the flat heating type of a halogen line heater several sets. The carbon fiber cloth became soft for a short time, and the product of press molding improved.