[ Problem Point ] The reduction of the defectiveness rate was necessary. [ ⇒Kaizen Point ] We ware molded using the Air Blow Heater. Since the heating air fluidity of the resin is improved.

[ Problem Point ] Shortening of the dry time was necessary. [ ⇒Kaizen Point ] We ware heated to work by using the Air Blow Heater. Dry time became short more markedly than air blow drying. Installation because it does ...

[ Problem Point ] The exact temperature control was necessary. [ ⇒Kaizen Point ] We adhered to PVC sheet using the Air Blow Heater. Rise early, it has allowed accurate temperature control. Besides, it became the maintenance-free as Air Blow ...

[ Problem Point ] There was not the small heater which could heat a nozzle. [ ⇒Kaizen Point ] The nozzle was heated to high temperatures and the use of ultra-small halogen point heater HPH-18. Since the compact, installation of ...

[ Problem Point ] There was not a heating method to make a steel sheet a high temperature in pinpoint. [ ⇒Kaizen Point ] We have auxiliary heating using a halogen point heater. Because it is heated to a high ...

[ Problem Point ] The heat resistance of the bonding material had a limit. [ ⇒Kaizen Point ] Changes in the material could be confirmed by visual inspection. Since infrared heating and heated in a nitrogen atmosphere, was able to ...

■□■━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━■ □■　   Heat-tech News Letter – Vol. 014　 2016-10-15                            □■ ■━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━■□■ □ INDEX ■1. Guidance of the new product ■2. Guidance of new applications ■3. Movie Library ■4. Editor’s note ┏━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┓ ■1. Guidance of the new product ┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛ 1-1) ...

[ Problem Point ] It was not able to heat the material from the outside of the vacuum chamber. [ ⇒Kaizen Point ] We saw it using a halogen point heater and heated it at high temperature from a window. ...

[ Problem Point ] It could not distorted test due to sliding heating of precision parts. [ ⇒Kaizen Point ] The precision parts by using a halogen point heater was high temperature heating. Since can be heated to a high ...

This video is a heating, melting and vitrification of Sodalite by the Halogen Point Heater. Please check the following site for more information.

This video is a heating, melting and vitrification of Burunaito by the Halogen Point Heater. Please check the following site for more information.

This video is a demonstration to heating of the brass ring with a halogen point heater HPH-160 / f40. Please check the following site for more information.

This video is a demonstration to heating heating of zinc alloy decorative metal with a halogen point heater HPH-160 / f40. Please check the following site for more information.

This video is a demonstration to heating dissolution of copper wire with a halogen point heater HPH-160 / f40. Please check the following site for more information.

This video is a demonstration to heating of Stainless steel nails with a halogen point heater HPH-160 / f40. Please check the following site for more information.

This video is a demonstration to heating dissolution of iron nails with a halogen point heater HPH-160 / f40. Please check the following site for more information.

This video is a demonstration to heating dissolution of copper nails with a halogen point heater HPH-160 / f40. Please check the following site for more information.

This video is a demonstration to heating dissolution of brass nails with a halogen point heater HPH-160 / f40. Please check the following site for more information.

Like incandescent lamps, halogen lamps need to have a sealed structure that prevents the enclosed gas from leaking to the outside. Also, in halogen lamps, the temperature of the valve must be 250 degrees or higher as a condition for ...

About quartz glass bulbs Due to the halogen cycle, halogen lamp bulbs must be heat-resistant glass with a temperature of 250℃ or higher when lit. In addition, the inert gas and halogen gas in the bulb are sealed at a ...

About heat treatment of tungsten Tungsten has a melting point of 3422 ℃, which is the highest melting point of metals. From a machining perspective, the ductile-brittle transition temperature is high and low temperature brittleness is seen at room temperature. ...

Tungsten, which has the highest melting point of metals, is used as the filament. In order to suppress heat loss due to the halogen gas to be enclosed, a filament that has been improved from a straight line and made ...

Halogen lamp gas type Halogen lamps are incandescent lamps that contain an inert gas and a small amount of halogen gas inside the lamp. Inert gas Inactive gas includes helium (He 4.00g/mol), neon (Ne 20.18g/mol), (nitrogen (N2 28.02 / mol)), ...

Manufacture the specification of the power cable. When the plug or the connector which the upper figure does not have are necessary, we will manufacture as much as possible. << Quotation model specification method >> (Heater controller model) – (Plug ...

■□■━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━■ □■　   Heat-tech News Letter – Vol. 013　 2016-07-15          □■ ■━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━■□■ □ INDEX ■1. Guidance of the new product ■2. Guidance of new applications ■3. Movie Library ■4. Editor’s note ┏━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┓ ■1. Guidance of the new product ┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛ 1-1) 《 　High-performance ...